View FQ1216ME_389375.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RF SOLUTIONS
FQ1216ME (MK3 family) Multi-Standard Desktop Video Modules
Product specification
3139 149 10330
1
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
FEATURES * * * * * * * * * * * * Multi-Standard TV Systems Broadcast reception True 5 V device (low power dissipation) Full frequency range from channel E2 (48.25 MHz) to channel E69 (855.25 MHz) PLL controlled tuning Programmable PLL step size (31.25 / 50 kHz or 62.5 kHz) True-synchronous vision IF demodulator (PLL) Ultra linear FM PLL demodulator Demodulated video output, AF sound output, second IF sound output. 2 I C-bus control of tuning, address selection, AFC status information nd User-settable 2 IF address for PIP application Complies with European regulations on radiation, signal handling and immunity ("CENELEC 55020, 55013" ) Small horizontally mounted metal 70 mm housing
FQ1216ME MK3
ORDERING INFORMATION TYPE FQ1216ME/I H-3 FQ1216MP/I H-3 FQ1216ME/I V-3 FQ1216ME/P H-3 FQ1216ME/L H-3 DESCRIPTION IEC / Horizontal / User-settable 2
nd nd
ORDER NUMBERS 3139 147 18291 3139 147 18321 3139 147 19151
nd
IF address
IEC / Horizontal User-settable 2 IF address IEC / Vertical / 2 fixed IF address
nd
nd
Phono / Horizontal / User-settable 2 IF address Long IEC / Horizontal / User-settable 2 IF address
3139 147 18771 3139 147 18891
MARKING The following items of information are printed on a sticker that is on the top cover of the tuner: * * * * * Type number Code number Origin letter of factory Change code Year and week code
3139 149 10330
2
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
DESCRIPTION
FQ1216ME MK3
The FQ1216ME family belongs to the new FM1200 MK3 family of small size frontends, which are designed to meet a wide range of RF applications in the PC /TV Multi-Media environment. The FQ1216ME combines the functions of an all-band TV tuner, and a multi-standard TV IF demodulation unit for both positive and negative modulated TV systems. The FQ1216ME is intended for CCIR L/L' (France), B/G, I and D/K systems. The FQ1216MP covers only CCIR B/G, D/K and I. The frontends have a built-in digital (I C) PLL tuning system. A DC-DC converter circuit is built-in in the FQ1216ME to synthesize the tuning voltage required, thus making the frontend a true 5V device. The FQ1216ME/IV-3 has a fixed address of # 84 for the IF processor. For all others, a second address can be set by using a 2K2 resistor at 10 of the module. All modules use the narrowband AGC detection system.
2
INTERMEDIATE FREQUENCIES SYSTEM Picture carrier Colour Sound 1 Sound 2 NICAM L 38.90 34.47 32.40 33.05 L' 33.95 38.38 40.40 39.80 B/G 38.90 34.47 33.40 33.16 33.05 D/K 38.90 34.47 32.40 33.05 I 38.90 34.47 32.90 32.348
CHANNEL COVERAGE BAND Low band Mid band FREQUENCY (MHz) 48.25 to 158.00 MHz
+
160.00 to 442.00 MHz
High band 442.00 to 863.25 MHz + Can cover down to 45.75 MHz (Ch A for Ireland)
3139 149 10330
3
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
PINNING SYMBOL N.C. N.C. +5V SCL SDA AS_TU NC IF-AS 2 IF sound CVBS +5V, IF AF O/P GROUND
nd
FQ1216ME MK3
PIN 1 2 3 4 5 6 x x 9 10 11 12 13 14
DESCRIPTION (AGC Monitor) Do Not Connect * (Tuning Voltage Monitor) Do Not Connect * Supply Voltage Vb, Tuner section IC-Serial Clock IC-Serial Data IC-Address Select_Tuner part (see Pg 20) Not Connected Not Connected Not Connected Second Address for IF circuit * see Pg 20) Second IF sound output Composite Video Baseband Signal Supply Voltage, IF section AF sound output Mounting Tags (TH1,TH2,TH3,TH4)
* For process use only
3139 149 10330
4
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
LIMITING VALUES Limiting values under operational conditions The tuners are guaranteed to function properly under the following conditions. SYMBOL VAGC PARAMETER AGC Voltage Monitor (not to be connected) (See Note 1) Tuning Voltage Monitor (not to be connected) Supply Voltage Vb Ripple susceptibility (see Note 2) 20Hz 1kHz 1kHz 200kHz Supply current SCL bus input voltage SDA Bus input voltage SDA Bus current (open collector) AS voltage (see Note 3) 2 IF sound output - Load impedanceD.C. A.C. Composite Video Baseband Signal - Load impedanceD.C. (see 10.3) (modulus) A.C. - Load time constant Supply voltage, IF section Ripple susceptibility (see Note 2) 20Hz 1kHz Current AF output - Load impedance D.C. A.C. 1kHz 500kHz 12
nd
FQ1216ME MK3
PIN 1
MIN. 10 M
TYP.
MAX.
UNIT
VT VS
2 3
4.75
5
5.25 2 10 150 5.25 5.25 5 5.25
V mVpp mVpp mA V V mA V k k ns V
80 4 5 6 11 1.0 1.0 75 75 -0.3 -0.3 -1.0
VSCL VSDA
100 13 4.75 5.25
100 14 100.0 10.0
2 10 160
mVpp mVpp mA k k
Note 1 : Minimum impedance required is 10M, otherwise AGC voltage is loaded down. For process only. Note 2 : Maximum allowable Ripple voltage superimposed on the +5V supply in the frequency range from 20 Hz to 500 kHz. Criteria : for TV : f<2.12 kHz or AM < 0.28% Note 3 : For detailed information about address coding, refer to Application Information.
3139 149 10330
5
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Environmental conditions SYMBOL PARAMETER CONDITIONS MIN.
FQ1216ME MK3
MAX.
UNIT
Non-operational Conditions TAMB RH gB gS Ambient temperature Relative humidity Bump acceleration Shock acceleration Vibration amplitude Operational conditions TAMB RH Ambient temperature Relative humidity 0 +60 95 C % 25 g 50 g (10-55 Hz) -25 +85 100 245 490 0.35 C % m/s m/s
2 2
mm
OVERALL PERFORMANCE Conditional data Unless otherwise specified, all electrical values for "Overall performance" apply at the following conditions. SYMBOL TAMB RH VS ZS(AE) ZIF PARAMETER ambient temperature relative humidity supply voltage (tuner and IF section) aerial source impedance (unbalanced) second IF sound output load Video output load VST AF1 sound output load VALUE 25 5 60 15 5 0.125 75 0.5 75 100 UNIT
o
C
% V k k
3139 149 10330
6
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
TUNER CHARACTERISTICS EQUIPMENT DC Voltmeter Oscilloscope PARAMETER input impedance input impedance resistance capacitance Spectrum analyzer FET probe input impedance input impedance resistance capacitance
FQ1216ME MK3
VALUE 10 1 15 50 10 3.5
UNIT M M pF M pF
3139 149 10330
7
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
TEST DIAGRAM
FQ1216ME MK3
The frontend characteristics are measured according to the test diagram depicted below :
aerial connector TV 7 123456 8 9 10 11 12 13 14
SCL SDA
1 nF 3 k
+
33 F
10 nF
+ 5V
FM1200 MK3 Evaluation board
BU5
BU4 Video out
BU6
P
(1) (1) BU4 loaded with 75 (video monitor) SA = Spectrum Analyzer P = FET probe DA = Distortion Analyzer (Zi - 100 k ) The minimum load impedance required at the CVBS output75 (both AC and DC) SA DA
3139 149 10330
8
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Definitions of test signals TEST SIGNAL A0: unmodulated vision carrier A1: L-system signal with video modulation A2: B/G/D/K/I -system signal with video modulation A3: L' - system signal with video modulation. B1: unmodulated main sound carrier B/G/I/D/K system as chosen B2: AM-modulated sound carrier L-system B3: FM-modulated main sound carrier B/G/I/D/K system respectively B4: unmodulated 2nd sound carrier B/G - system B5: unmodulated main sound carrier L system B6: AM modulated sound carrier L' system FREQ. (MHz) 480.25 480.25 480.25 55.75 A2 + 5.5/6.0/6.5 MHz 486.75 MHz A2 + 5.5/6.0/6.5 MHz A2 + 5.85 MHz A1 + 6.5 MHz A3 - 6.5 MHz 60 dB(V) 60 dB(V) (peak white) 60 dB(V) (top sync.) 60 dB(V) (peak white) -13 dB respectively wrt A2 -10 dB with respect to test signals A0 or A1 -13 dB respectively wrt A2 -20 dB respectively wrt A2 -10 dB wrt test signal A1 -10 dB wrt test signal A3 AMPLITUDE
FQ1216ME MK3
MODULATION
100 % (sync. level at 0%), 2T-pulse and bar, unless otherwise indicated. 100% (rest carrier 10%), 2T-pulse and bar, unless otherwise indicated 100% (sync. white < 6%), 2T pulse and bar, unless otherwise indicated
m=0.54, mod. freq. 1 kHz, unless otherwise indicated freq.dev.=27 kHz, mod.freq. 1kHz, 50 s pre-emphasis, unless otherwise indicated
M = 0.54, mod. freq. 1 kHz, unless otherwise indicated
3139 149 10330
9
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
AERIAL INPUT CHARACTERISTICS SYMBOL VSWR VSURGE VANT surge protection antenna terminal disturbance voltage up to 1.75 GHz PARAMETER CONDITIONS referred to 75 at RF picture carrier frequency
FQ1216ME MK3
MIN. 5 -
MAX. 5
UNIT
kV 46 dBV
GENERAL CHARACTERISTICS SYMBOL PARAMETER fb frequency range low band mid band high band margin low band mid/high band low band mid band high band Image rejection low band mid band IF high band IF rejection All bands CONDITIONS MIN. 48.25 160.00 442.00 1.5 1.5 36 36 36 - wanted test signal Fant at 60 dBuV - unwanted test signal at (Fant + 77.7) MHz 65 60 50 - wanted test signal Fant. - unwanted test signal A0 with frequency (FIF,PC - 1) MHz Tuning speed (lock bit, CP = 1) All terminals of each frontend are protected against electrostatic discharge up to The products are classified in category B (MIL-STD883C). Fwanted 60 TYP. MAX. 158.00 442.00 863.25 UNIT MHz MHz MHz MHz MHz dB dB dB dB dB dB dB
fb
voltage gain j
45 45 45
55 55 55
tlj VESD
Oscillators lock-in time ESD protection at the terminals
150
ms
2
KV
Maximum signal handling
100
110
-
dBV
3139 149 10330
10
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Video and audio characteristics PARAMETER CVBS output level Amplitude video signal DC level of sync. Pulse CVBS amplitude at discrete frequencies 2 MHz 3 MHz 4.43 MHz Sound Carriers Rejection Specification valid for : B/G, I and D/K mode wrt 1 MHz for : 5.5/6.0 MHz 6.5 MHz Unweighted CVBS Signal to Noise Ratio Specification valid for : L/L', B/G, I, D/K modes Unweighted SNR Gain limited sensitivity (-1dB video signal) Carrier level of test signal TEST SIGNAL TEST POINT A1 A1 A1 A1 A1 A2 + B1 + B4 BU4 BU4 BU4 BU4 BU4 BU4 42 40 A1 or A2 or A3 BU4 40 0.7 MIN.
FQ1216ME MK3
TYP.
MAX.
UNIT
1.0 0.35 0.0 - 0.5 -1.0
1.3
Vpp V
- 1.5 - 2.5 - 4.0
dB dB dB
dB dB 44 dB
A2
BU4
33
dBV
PARAMETER Audio output characteristics Specification valid for : B/G, D/K and I modes AF output level (C7 = 0) measured via LP 20 kHz filter, RMS detector 50s de-emphasis for AF1 at 1 kHz (C5 = 1, C6 = 1) Specification valid for : L/L' mode (C5 = 0) modulation = 54% AF output level (C7 = 0) Specification valid for : B/G, D/K, I modes THD (Total Harmonic Distortion) Signal-to -Noise ratio measured via LP 20 kHz filter, RMS detector 50s de-emphasis for AF1 at 1 kHz (C5 = 1, C6 = 1) Specification valid for : L/L' mode THD (Total Harmonic Distortion) Signal-to -Noise ratio measured via LP 20 kHz filter, RMS detector for AF1 at 1 kHz Specification valid for : B/G, D/K and I modes (S/N = 40 dB) (C5 = 1, C6 = 1) Audio sensitivity Specification valid for : L/L' mode (S/N = 38 dB) Audio sensitivity
3139 149 10330
TEST SIGNAL
TEST POINT
MIN.
TYP.
MAX.
UNIT
A2 + B3
BU6
400
500
600
mVrms
A1 +B2 or A3 + B6
BU6
350
450
550
mVrms
50 A2 + B3 BU6
0.2 63
0.6 -
% dB
42 A1 + B2 or A3 + B6 A2 + B3 A1 + B2 or A3 + B6 BU6 BU6
0.8 50
1.5 -
% dB
40
dBV
BU6
45
dBV
11
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
APPLICATION INFORMATION
FQ1216ME MK3
DEMONSTRATION KIT A demonstration kit is available for the FQ1216ME (software, Application Note and evaluation board). Please contact your local Sales Engineer for details about the price and availability I C PROGRAMMING 2 For information regarding general aspects of IC bus control see 'The I C-bus and how to use it', published by Philips Semiconductors under the code : 9398 393 40011. 2 The FQ1216ME contains two I C transceivers, one in the tuner part and one in the IF part. It is imperative to 2 ensure that both I C devices are programmed correctly according to their addresses If in doubt, please refer to the demonstration software.
2
3139 149 10330
12
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Tuner Part Programming (Write Mode)
BIT ALLOCATION (WRITE MODE , R/W = 0). Write Data Address Byte ADB Divider Byte 1 DB1 Divider Byte 2 DB2 Control Byte CB MSB 1 0 N7 1 P7 ATC bit6 1 N14 N6 CP P6 AL2 bit5 0 N13 N5 T2 P5 AL1 bit4 0 N12 N4 T1 P4 AL0 bit3 0 N11 N3 T0 P3 0 bit2 MA1 N10 N2 RSA P2 0
FQ1216ME MK3
bit1 MA0 N9 N1 RSB P1 0
LSB R/W=0 N8 N0 OS P0 0
ACK A A A A A A
Bandswitch Byte BB Auxiliary Byte AB (note *)
Note *: By default it is set to AL2=0, AL1=1, AL0=0. This sets the tuner TOP to 112 dBuV upon power-on reset. ADDRESS SELECTION (BYTE ADB) Voltage at terminal 6 0 .......... 0.1 Vcc 0.2..........0.3 Vcc 0.4 ........ 0.6 Vcc 0.9 Vcc ...... 5 V Address C0 C2 C4 C6 MA1 0 0 1 1 MA0 0 1 0 1
Note: If the AS pin is left floating, the internal biasing will automatically set the address to C2. PROGRAMMABLE DIVIDER SETTING (BYTES DB1 AND DB2) Divider ratio: N = FOSC/Fss
where FOSC = ( FRF + FIF ) and Fss is the step-size set by RSA and RSB as described below. N = 8192*N13 + 4096*N12 + 2048*N11 + 1024*N10 + 512*N9 + 256*N8 + 128*N7 + 64*N6 + 32*N5 + 16*N4 + 8*N3 + 4*N2 + 2*N1 + N0 Note: FIF = 38.9 MHz, except for L' mode. In this case FIF = 33.95 MHz
CONTROL BYTE CB Charge Pump Setting: CP can be set to either 0 (low current) or 1 (high current). CP = 1, charge pump current = 280uA results in fastest tuning (default mode) CP = 0 , charge pump current = 60uA results in moderate speed tuning with slightly better residual oscillator Test Mode Setting: T2 = 0, T1 = 0, T0 = 1 for normal operation (default) T2 = 0, T1 = 1, T0 = 1 indicates that Byte AB will follow Byte CB instead of Byte BB for the current IIC Byte sequence.
3139 149 10330
13
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
PLL Disabling: OS=0 OS=1 for normal operation, switches off the PLL tuning amplifier (PLL tuning is disabled)
FQ1216ME MK3
Ratio Select Bits RSA = 0, RSB = 0 RSA = 0, RSB = 1 RSA = 1, RSB = 0 RSA = 1, RSB = 1 gives 50 kHz step-size gives 31.25 kHz step-size (for slow picture-search) gives 166.7 kHz step-size gives 62.5 kHz step-size (for normal picture-search)
BANDSWITCHING BYTE BB PORTS LOW BAND MID BAND HIGH BAND P0 1 0 0 P1 0 1 0 P2 0 0 1 P3 0 0 0 P4 0 0 0 P5 X X X P6 X X X P7 X X X
AUXILLIARY BYTE AB The AGC Take Over Point can be set by programming the following bits AL2, AL1, AL0
IF output level, symmetrical mode 115 dBV 115 dBV 112 dBV 109 dBV 106 dBV 103 dBV I AGC = 0 3.5 V Remarks: 1). The AGC detector is disabled. Both the sinking and sourcing current from the IC is disabled. The AGC output goes into a high impedance state and an external AGC source can be connected in parallel and will not be influenced. 2). The AGC detector is disabled and I AGC = 9 A. External AGC . See remarks (1) & (3). Disabled . See remarks (2). default mode at POR
Remark
AL2 0 0 0 0 1 1 1 1
AL1 0 0 1 1 0 0 1 1
AL0 0 1 0 1 0 1 0 1
Recommended for negative modulation Recommended for positive modulation
Note: The AGC detection system has been changed to the narrowband mode for both negative and positive modulation systems. All new versions carry the code SV21 (old versions carry the code SV20). The settings have been hard-coded inside the modules and customers are not required to change their software to adapt to the new AGC system.
3139 149 10330
14
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Tuner Part Programming (Read Mode)
BIT ALLOCATION (READ MODE R/W = 1) MSB Address Byte ADB Status Byte SB 1 POR bit6 1 FL bit5 0 1 bit4 0 1 bit3 0 AGC bit2 MA1 A2 bit1 MA0 A1
FQ1216ME MK3
LSB R/W=1 A0
ACK A A
The following data can be read from the device through the status byte: POR (power on reset): POR is internally set to 1 in case Vcc drops below 3V. The POR bit is reset when an end of data is detected by the PLL-IC. FL: in lock flag (FL = 1 when the phase lock loop is in lock). The loop must be phase-locked during at least 8 periods of the internal 7.8125 kHz reference-frequency (i.e. 1 msec) before the FL flag is internally set to 1. AGC : internal AGC flag. A2, A1, A0 : Not used. AGC=1 when internal AGC is active (level below 3V)
3139 149 10330
15
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
IF Part Programming (Write Mode)
The IF uses the new TDA9887 demodulation IC from Philips Semiconductors. I C Bus Control -format to WRITE (slave receives data) S BIT S Standard SLAVE ADDRESS R/W = 0 A SUBADDRESS (SAD) DATA P SLAVE ADDRESS R/W=0 A SAD A DATA
2
FQ1216ME MK3
A
P
FUNCTION START condition 100 0011X where X is the value of R/W ** Write Mode acknowledge, generated by slave See table below Bytes B, C and E (described below) STOP condition
** Note The FQ1216ME/IV-3 (12 NC = 3139 147 19151) has a fixed IF address of # 84. SUB ADDRESS BYTE (SAD, first byte after slave address) DATA BYTE FOLLOWING SAD SWITCHING (B DATA) ADJUST (C DATA) DATA (E DATA) MSB D7 0 0 0 LSB D0 0 1 0
D6 0 0 0
D5 X 0 0
D4 X 0 0
D3 X 0 0
D2 X 0 0
D1 0 0 1
DESCRIPTION OF THE BITS OF THE VARIOUS DATA BYTES DATA BYTE BIT B0 B1 B2 B DATA B3 and B4 B5 B6 B7 Co to C4 C DATA C5 to C6 C7 E0 and E1 E2 to E4 E DATA E5 E6 E7 SUBADDRESS SWITCHING SWITCHING SWITCHING SWITCHING SWITCHING SWITCHING SWITCHING ADJUST ADJUST ADJUST DATA DATA DATA DATA DATA FUNCTION video mode (sound trap) auto mute FM carrier mode TV standard positive/negative modulation (B3=0) forced mute audio not used L/L' Sound TOP adjustment de-emphasis audio gain standard sound carrier standard video IF VIF, SIF and tuner minimum gain L standard PLL gating HIGH VIF-AGC
3139 149 10330
16
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
For convenience, the programming has been consolidated as a single table. EEEEEEEECCCCCCCCBBBBBBBB 765432107654321076543210 10110 10110 10110 00110 00110 Video Trap Bypass Auto Mute FM Carrier Mode FM Mode TV Modulation Forced Mute Audio Not Used (OP1) L/L' Sound (OP2) XXXXX
FQ1216ME MK3
000000
000000
000000
000000
000100 0 L' 101001 101010
TOP Adjustment
De-Emphasis De-Emphasis Time Audio Gain Sound Intercarrier
Video IF IF Gain L/L' PLL Gating VIF AGC Output
0
0
0
0
Description
Bits
3139 149 10330
17
TV Systems
Force Audio Mute
B/G
D/K
L
I
0
XXXXXXXXXXXXXXXXX1
101110
001110
101110 100101
100100
100101
100101
101010
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
IF Part Programming (Read Mode)
FQ1216ME MK3
The IF uses the new TDA9885 (MP versions) or TDA9886 (ME versions) demodulation IC from Philips Semiconductors. I C Bus Control -format to READ (slave transmits data) S BIT S Standard SLAVE ADDRESS R/W = 1 A DATA AN P SLAVE ADDRESS R/W=1 A FUNCTION START condition 100 0011X where X is the value of R/W ** Read Mode acknowledge, generated by slave Byte D (described below) acknowledge not, generated by the master STOP condition, generated by the master DATA AN P
2
The master generates an acknowledge when it has received the dataword READ. The master next generates an acknowledge, then slave begins transmitting the dataword READ, and so on until the master generates no acknowledge and transmits a STOP condition. ** Note The FQ1216ME/IV-3 (12 NC = 3139 147 19151) has a fixed IF address of # 84. Byte D (Transmitted byte after read condition - Status Register) FUNCTION READ MSB D7 AFCWIN LSB D0 PONR
D6 VIFL
D5 FMIFL
D4 AFC4
D3 AFC3
D2 AFC2
D1 AFC1
PONR = 1 After power-on reset or after supply breakdown PONR = 0 After a successful reading of the status register FMIFL = Not used. VIFL = 1 Video IF level HIGH VIFL = 0 Video IF level LOW
3139 149 10330
18
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
AFC STATUS It is possible to monitor the AFC status via the D1-D4 bits. Function AFC FVIF vs F0 (1) FVIF F0- 187.5 kHz D4 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D3 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 Bits D2 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0
FQ1216ME MK3
D1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
FVIF = F0 - 162.5 kHz FVIF = F0 - 137.5 kHz FVIF FVIF FVIF = F0 - 112.5 kHz = F0 - 87.5 kHz = F0 - 62.5 kHz = F0 - 12.5 kHz
FVIF = F0 - 37.5 kHz FVIF
FVIF = F0 + 12.5 kHz FVIF = F0 + 37.5 kHz FVIF = F0 + 62.5 kHz FVIF = F0 + 87.5 kHz FVIF = F0 + 112.5 kHz FVIF = F0 + 137.5 kHz FVIF = F0 + 162.5 kHz FVIF F0 + 187.5 kHz Note 1. F0 = nominal FVIF AFCWIN = 1 FVIF inside AFC Window AFCWIN = 0 FVIF outside AFC Window PROGRAMMING EXAMPLES
Example 1: To tune to Ch E21 (471.25 MHz) in high band Fosc = 471.25 + 38.9 = 510.15 MHz N = (510.15 MHz) / (62.5 kHz) = 1F E2 (Hexadecimal) So DB1 = 1F H and DB2 = E2 H CB = 86H if CP is set to low or CB = C6H if CP is set to high BB = 44H (because of high band selected)
3139 149 10330
19
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Example 2 : To tune to a PAL B/G program at 471.25 MHz
FQ1216ME MK3
IF I C program Tuner I C program Example 3 : To tune to a SECAM program at 471.25 MHz (L system)
2
2
Tuner I C program
2
IF I C program
2
3139 149 10330
20
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
LOADING OF I C BUS
2
FQ1216ME MK3
The FQ1216ME contains series impedances in the SCL and SDA lines : a total of R= 220 ohms leading to the tuner part and R= 300 ohms leading to the IF demodulation part. See the diagram below. Both lines also have capacitive loads of C= 22 pF max. Care must be taken to ensure that the total load on the bus does not 2 exceed that as mentioned in the brochure "The I C-bus and how to use it".
100
100 180
180
120
120
SDA
SCL
AUDIO EMPHASIS The audio de-emphasis (50 us) is set by the bits C5 and C6 C5=0 de-emphasis OFF C5=1 de-emphasis ON C6=1 50us C6=0 75 us De-emphasis should be switched off in L/L' mode since it is not required for AM sound. CVBS LOAD / TUNING VOLTAGE SUPPLY A video buffer is built into the frontend to enable the unit to drive a 75 load directly (e.g. into the SAA711x directly). A DC-DC converter for providing the required tuning voltage supply is already built into the FQ1216ME.
PIP APPLICATION
The FQ1216ME has a second user-defined address for the IF circuit. By setting a 2K2 resistor at pin 10, the AFRIC address is set to # 84. In the same manner, with a 1K resistor to ground at pin 6, the tuner is set to an address of # C0. The other FQ1216ME Mk3 remains unchanged with an address of # C2 and # 86 respectively. An example is shown below.
PIP Frontend
Address: # C0 and # 84 FQ1216ME /PH-3
1 6 10
Active Splitter Module
1K0
2K2
Main Frontend
Address: # C2 and # 86 FQ1216ME/PH-3
3139 149 10330
21
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
CVBS Output level
FQ1216ME MK3
CVBS at pin 12 (into 75 ohm load)
V dc
1.35 V
1 Vpp 0.65 V
0.35 V
VIDEO SIGNAL TO NOISE RATIO
V i d e o S ig n a l-t o - N o is e R a t io ( W e ig h te d ) @ C h 2 1 65 60 55 50 45 SNR dB 40 35 30 25 20 15 10 10 20 30 40 50 60 70 80 90 100 110 In p u t L ev e l d B u V
3139 149 10330
22
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
MECHANICAL DATA
See product drawing 3139 149 0120 AERIAL CONNECTIONS Standard connector in accordance with type order information found on Page 2 and drawings found on Page 25. SOLDERABILITY The solderability of pins and mounting tags when tested initially and after 16 hour steam ageing in accordance with "IEC 60068-2-20", test Ta, method 1 (solder bath 235C for 2s), results in a wetted area of 95%. No de-wetting will occur when soldered at 260C for 5s. RESISTANCE TO SOLDERING HEAT The product will not be damaged when tested in accordance with "IEC 60068-2-20", test Tb, ,method 1A (solder bath 260C for 101 s). MASS Approximately 45g. PACKAGING INFO The products are packed in the carton box and transferred to customers by Pallet Transport.
Mounting Type Horizontalmount type Verticalmount type Carton Pallet Carton Pallet Dimension B x w x h (cm) 46 x 34 x 5.4 120 x 105 x 105 46 x 34 x 10.2 120 x 105 x 105 No. of sets 40 4280 120 6960 Gross Wt (Kg) 2.34 272.38 6.38 392.04
FQ1216ME MK3
ROBUSTNESS OF PINS The pins will not be damaged when tested in accordance with "IEC 60068-2-21": * Test Ua1, tensile of 10N in axial direction * Test Ua2, thrust of 4N in axial direction PUNCHING PATTERN OF CHASSIS PCB For optimum mounting of the tuner to a PCB, the punching pattern is recommended (see 3139 149 0120). The tuner must be mounted without clearance between the tuner supporting surface and the printed circuit board (PCB). When mounted in this way, the tuner must be soldered to the PCB. This can be achieved by pressing the unit vertically onto the PCB during soldering.
Example of Carton Box:
b
w
Carton Boxes are made of Corrugated Fibreboard which are free of environmentally banned substances.
h
3139 149 10330
23
Rev g : 16.02.2004
Multi-Standard Desktop Video Module
FQ1216ME MK3
3139 149 10330
24
Rev g : 16.02.2004
Multi-Standard Desktop Video Module
FQ1216ME MK3
3139 149 10330
25
Rev g : 16.02.2004
Multi-Standard Desktop Video Module
FQ1216ME MK3
3139 149 10330
26
Rev g : 16.02.2004
Multi-Standard Desktop Video Module
FQ1216ME MK3
3139 149 10330
27
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
Document revision history Rev # 0 0.1 0.2 0.3 0.3 0.3 0.4 1 1 1.1 1.2 1.3 1.4 b c d e Date 20-02-01 16-04-01 17-07-01 18-10-01 10-12-01 28-02-02 01-04-02 06-05-02 15-05-02 21-06-02 15-07-02 20-09-02 18-12-02 15-07-03 01-10-03 10-11-03 Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Approved by Toh Kong Lim Toh Kong Lim Toh Kong Lim Toh Kong Lim Remarks New
FQ1216ME MK3
Trigger by Soh KL, changes in page 18 Trigger by Toh KL, changes in pg 10-13, 16-19 Trigger by Paxton Tan, changes in pg 11-20 and product drawings. Updating last page Updating last page Trigger by Toh KL, changes in pg 2 Trigger by Soh KL, product drawings changed under CP 63459 Trigger by Paxton Tan, changes in pg 2 (1 new model added), pg 3 (Channel Coverage) and product drawings. Data sheet updated by Paxton, changes in pg 2, 3, 4, 5, 8, 10, 13, 14, 15, 20, 22 & prod. dwgs. Trigger by Toh KL, updating pg 10 (Audio output characteristics) no change Trigger by Toh KL, updating pg 9, 10 & last page. Updating front and last page Updating last page & Pg 13 : 1) change of TOP to a lower value; 2) set ATC = 0 Trigger by Soh KL, updating mechanical drawings Triggered by Toh KL; Pg 2, 3, 13, 15, 17 : remarks added. 2 Pg 20 : Adding I C drawing and PIP drawing; Trigger by Toh KL; nd Pg 2 : features description add - User-settable 2 IF address for PIP application and ordering information description changed. Pg 3 : description add - For all others, a second address can be set by using a 2K2 resistor at 10 of the module. All modules use the narrowband AGC detection system. Pg 14 : add notes. Trigger by Toh KL; Pg 14 - notes - all new versions carry the code SV21 instead of SV22 with effect from 1 April 2004
f
10-02-04
Toh Kong Lim
g
16-02-04
Toh Kong Lim
3139 149 10330
28
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
DEFINITIONS
FQ1216ME MK3
Data sheet status Objective specification Preliminary specification Product specification Application Information Where application information is given, it is advisory and does not form part of the specification This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specification.
LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
PURCHASE OF PHILIPS I C COMPONENTS
2
Purchase of Philips I C components conveys a license under the Philips I C patent to use 2 2 the components in the I C systems to the I C specification defined by Philips. This specification can be ordered using the code 9398 393 40011.
2
2
3139 149 10330
29
Rev g : 16.02.2004
Philips RF Solutions
Product specification
Multi-Standard Desktop Video Module
FQ1216ME MK3
RF Solutions Sales Offices
Brazil: Philips RF Solutions, Tel: +55 11 2125 0833, Fax: +55 11 2125 0828 China: Philips RF Solutions,
Tel. +86 21 6354 1088, ext. 5806, Fax. +86 21 6354 1060 (Shanghai) Tel: +86 512 6824 6688 ext 3786, Fax: +86 512 6825 0413 (Suzhou)
Germany: Philips RF Solutions,
Tel. +49 170 203 230 8, Fax. +49 221 2854452
Hong Kong: Philips RF Solutions, Tel. +852 2666 2809, Fax. +852 2666 2814 India: Philips RF Solutions,
Tel. +91 22 5 691 2127, Fax. +91 22 5 691 2184
Korea (Republic of): Philips RF Solutions,
Tel. +82 2 709 1475, Fax. +82 2 709 1480
Spain: Philips RF Solutions, Tel. +34 93 270 4059, Fax. +34 93 270 4012 Taiwan: Philips RF Solutions,
Tel. +886 2 3789 2388, Fax. +886 2 3789 2394
Turkey: Philips RF Solutions, Tel. +90 216 522 1799, Fax. +90 216 522 1813 United States: Philips RF Solutions, Tel. +1 734 944 4299, Fax. +1 734 944 4427 For all other countries apply to:
Philips RF Solutions Prof. Holstlaan 4, Building WL 5656 AA Eindhoven, The Netherlands Tel. +31 40 27 45 799, Fax. +31 40 27 43 653
Internet: www.rfsolutions.philips.com
(c) Philips Electronics N.V. 2004. All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
3139 149 10330
30
Rev g : 16.02.2004

▲Up To Search▲

Price & Availability of FQ1216ME

	To Download FQ1216ME Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .